When you are oprning A hot water tap.
The opened tap allows water to flow through the water heater. An internal water flow sensor detects this flow.
Upon flow detection, the flow sensor sends the activation signal to the computer board.
The computer automatically ignites the burner.
As water flows through the heat exchanger, so it absorbs heat from the burner.
By the time the water exits the heater, it has reached the designated set temperature.
When the hot water tap is closed, the water heater automatically turns off.
|Heating technology||ELCB 24/35/45-B|
|Pressurized||No, single point use only|
|Installationt||Single point, above sink|
|Enclosure||ABS, blue color|
|Temperature accuracy||Not thermostatic|
|Hot water limit||49°С/80°С|
|Inlet/outlet pipe connection||G1/2|
|Water proof rating||IPX4|